Description
Features:
- The ignition torch is made of high quality material, durable and safe, ergonomic handle is comfortable to hold.
- 1300℃ max. flame temperature.
- With adjustment switch to change flame power, injection distance and flame temperature.
- Easy to be connected with liquefied gas bottle.
- Suitable for metal welding, machinery parts heat treatment, foundry industry, meat hair removal, piping maintenance, plastic melt, jewelry process, granite surface treatment, etc.
Specifications:
Condition: 100% New
Material: Metal + Plastic
Color: Gold + Black + Red
Maximum Flame Temperature: 1300℃
Maximum Output Pressure: 25MPa
Maximum Jet Flow: 2.5 L/min
Best Injection Distance: approx. 30mm / 1.18inch
Jet Width: approx. 30-50mm / 1.18~1.97inch
Size: #1, #2(Optional) approx.
Type
Torch Length
Nozzle Diameter
Red Tube Length
#1
37cm / 14.57inch
3cm / 1.18inch
1.18m / 3.87ft
#2
41cm / 16.14inch
3.5cm / 1.38inch
1.22m / 4.00ft
Weight: approx. 592~624g
Package Included:
1 x Ignition Torch(gas not included)
1 x Tube
1 x Set of Common Installation Accessory
Using Instruction:
1. Check: Connect all ignition torch parts, screw up the gas pipe clamp, connect pipe with liquefied gas bottle interface, close the ignition torch switch, loosen the liquefied gas cylinder valve, inspect all parts if air leakage.
2. Ignition: Slightly loosen the gun switch, ignite directly in the nozzle, adjust the flame gun switch to the required temperature and injection distance.
3. Shut down: First close liquefied petroleum gas cylinder valve, after being shut down, then close the switch, ensure no residual gas left in the tube.
4. Storage: Hang the flame gun and gas pipe in a dry place.
Attention:
1. This product is strictly forbidden to touch oil.
2. Replace in time once you find burns, aging, wear of the gas pipe.
3. When using, you should keep safe distance with the gas bottles, about 2 meters.
4. Often check each parts, keep the seal.
5. Do not use inferior gas.
6. If discover the congestion of air hole, loosen the nut in front of the switch or the nut between the nozzle and pipe.
7. Keep children away from this product.