This machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc), usually smash the medicine into the powder for no more than a minute. This machine is suitable for dispensary, medicine processing factory and powder processing.
Material: 304 Stainless steel
Interval time: 10 min
Fineness: 50 – 300 mesh
Plug Specification: US Plug
Grinding Capacity: 300g
Rotation Speed (r/min):25000
Base diameter: 150mm / 5.9″
Height: 320mm / 12.6″
Cable length: 1.5m
Features and Benefits:
● The high-speed multi-functional grinder features are as follows, Fine structure, low noise, small size, no vibration, compact appearance and easy operation.
● It can grind all kinds of corns and grains into fine powder at 50-300 mesh. It is widely used in families, clinic, hospital, pharmacy and institute laboratories.
? Medicinal materials
? Whole grains
? Food supplement
1. Open the upper cover and put the material inside;
2. Close the upper cover tightly;
3. Plug in and turn on the timer switch, then turn on the switch for grinding (Rolling sound will be heard );
4. Turn off the switch (When you hear the sound rolling evenly, the material has been grinded into powder, then you can turn off the switch);
5. Open the upper cover and take the powder out.
1. The spice grinder materials ready for grinding must be dry. And wet, moisture or oil materials are not suitable to be grinded into powder.
2. Each input material shall not exceed the rated weight or half capacity of crush cabin so that there is enough space for powder.
3. After switch on, if finding the material is wet or excessive in weight, it will jam the blade and stop the motor by giving warning noise.
So must plug out immediately to prevent motor from being damaged. And remove the jammed object. Then restart grinding.
4. The spice grinder grinding work usually needs 30 seconds to 1 or 2minutes. Over time working will cause bearing overheating.
5.Before using，a new machine need to be operated without anything in order to warm itself up，and then put something into it and to grind them;
6.When you use it in the first time，it may produce smell caused by carbon brush and this is normal.
1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2. The color may have different as the difference display,pls understand.